New house decoration People like to invite woodworkers to make cabinets and wooden doors, but can you think that old wooden boards can also make high-quality and beautiful barn doors? Let's take a look at how to make tall barn doors with old boards.
First, we prepared the old wooden board, and then used angle steel and welding machine to weld the frame of the barn door. As shown in the figure below, before welding, the edge of the angle steel needs to be smoothed with an angle grinder to ensure the tight combination of the angle.
After the frame is completed, the next step is to process the old boards that were just removed. Mark it according to the size of the frame, and then cut it with a cutting machine. Here we borrowed the straightness of the wooden block to cut it accurately, as shown in the following figure.
After cutting the board, put it into the frame to try the size, the effect is still acceptable, and then use the excess board to fix the half of the barn door, as shown in the figure below, try to determine the position of each board Then punch and fix.
However, in order to ensure the firmness of the old plank, he welded an extra steel plate in the middle position, so that the joint between the planks had a foothold, and the four corners of the plank were also added with steel plates, so that there would be no shaking Shake the situation.
The barn door is basically completed in this way. Finally, a handle is needed, which is welded by a large iron needle and a steel plate. The iron used to fix the handle is also welded by himself. This is the first time he made it.
This is the barn door after it is completed and installed. It looks very beautiful, not worse than what is bought on the market. Compared with the conventional sliding door, this old barn door has a more retro literary atmosphere.
