Home>Sliding barn door hardware kit>Carbon steel sliding door system kit>4.9FT/6FT/6.6FT/8FT Straight Black Carbon Steel Sliding Interior Barn Sliding Door Hardware Track Kit

4.9FT/6FT/6.6FT/8FT Straight Black Carbon Steel Sliding Interior Barn Sliding Door Hardware Track Kit Item NO.: A04L2

Write a Review

US$ 46.50

Ships From: China

Size: 150cm(4.9) kit 183cm(6ft) kit 200cm(6.6ft) kit 244cm(6.6ft) kit

Customized Requirements

Quantity: Stock ( 400 )

Estimate Shipping Cost

Surface Finishing: Finished
Main Material: STEEL
Model Number: A04L2
Charge Unit: Set
Open Style: Sliding
Opening Method: Side Opening
Position: Interior
Type: Sliding Doors
Sliding Door Type: Partition Doors
Door Material: Solid Wood
load bearing: 175kg
door thickness: 40-45mm
Material: Carbon steel
Mounted: Wall

Product Name	4.9FT/6FT/6.6FT/8FT Straight Black Carbon Steel Sliding Interior Barn Sliding Door Hardware Track Kit
Item NO.	A04L2
Weight	9 kg = 19.8416 lb = 317.4657 oz
Category	Sliding barn door hardware kit > Carbon steel sliding door system kit
Tag	Barn Sliding Door Hardware
Brand	Gerrit
Creation Time	2020-06-29

modname=ckeditor

A04L2 (1)

The designers and home builders are more and more preferred to use sliding barn door to create more space within the interior space. For example, the kitchen pantry, kids room, bathroom door, patio entrance. And the most home designers are getting higher aesthetic demand for interior designing, the sliding barn door is one of the options for them to increase interior aesthetic feeling.

Features

Passed official tests of 20,000 times running
_{Extended central wall hanger hole space for firmer and steadier connection}
_{Sturdy and durable construction}
_{Smooth, silent and effortless operation}
_{Roller stopper to prevent excessive sliding}
_{Strong floor guide to stabilize door movement}
_{Anti-jump to prevent rollers from jumping off the track}
_{Spacing saving & easy installation}
_{Comes with all necessary hardware for hanging the door}

Specifications

Only hardware,no door panel.One complete set include below parts.

Item Name	150cm rail (Quantity/set)	183cm rail (Quantity/set)	200cm rail (Quantity/set)	Description
Roller	2	2	2	For doors thickness 40-45mm.The strap of the hanger is made by 6mm thick carbon steel and the wheel is made by POM nylon, very durable and smooth.
Stopper	2	2	2	Door stoppers slide along the rail and tighten down at any point to stop your doors anywhere you want, and they're cushioned by rubber caps for a quiet close.
Rail	2	2	2	Rail length should be double than door width.Rail comes with pre-drilled holes and made by solid 6mm thick carbon steel, finished with highly durable powder coating.
Screws&Nuts	5	5	5	After completed installation,the distance between door and wall is about 2 cm.With lag bolts and the spacers, the rail can be securely attached to the studs (or header board) and can hold 270lbs comfortably. We also provide extra carriage bolts and anchors for concrete wall.
Anti Jump	2	2	2	Anti-jump to prevent rollers from jumping off the track
Floor guide	1	1	1	T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard.